Protein A Agarose antibody Antibody Purification Reagent


Catalog number


Full name

Protein A Agarose antibody Antibody Purification Reagent




120.00 €

Go to shop   



Other Reagents

Long description

This outstanding recombinant Protein A is coupled through a cysteine at the carboxy terminus creating an ether linkage to highly cross-linked agarose. It contains 6 mg of recombinant Protein A per ml of beads. The combinantion provides superior performance, binding 50 mg of human IgG per ml of beads under static conditions. Binding under flow will be less depending on the flow rate for all Protein A and Protein G products. Flow rate of 30 to 300 cm/hr are possible with this highly cross-linked agarose product under gravity flow, but it is not designed to pump under high pressure.

Antibody come from


Other description

Provided as solution in phosphate buffered saline with 0.08% sodium azide.


not specified

Antigen-antibody binding interaction

Protein A Agarose antibody Antibody Purification Reagent

Antibody is raised in

see techfile

Antibody's reacts with


Antibody's reacts with these species

This antibody doesn't cross react with other species

Antibody's specificity

No Data Available


IgG Purification

Antibody's suited for

Ligand Density: approximately 6 mg Protein A per ml of drained gel _x000B_Dynamic Binding Capacity: approximately 35 mg human IgG per ml of drained gel (estimated in a 0.7x5cm column at a linear flow rate of 300 cm/h under the following conditions: binding buffer: 0.1 M PBS pH 7.0, Eluting buffer 0.1 M citrate pH 3.0. 2.8 times excess IgG of the binding capacity was applied. _x000B_Bead Structure: 4% highly cross-linked agarose _x000B_Bead Size Range: 45 to 165 µm _x000B_Mean Bead Size: approximately 90 µm _x000B_Maximum Linear Flow Rate: >1300 cm/hour at 25 deg C in an XK 16/20 column, bed height 5 cm _x000B_pH Stability: Long term storage - 3 to 9; short term storage - 2 to 10 _x000B_Chemical Stability: IgG binding capacity and recovery maintained after storage for (a) 7 days at 40 ¼ C in 3M NaSCN, 6M guanidine-HCl, 0.1M glycine (pH3.0), 70% ethanol; 10 hours at 23¼ C in 8M urea, 0.1M glycine (pH 11), 5.8M acetic acid (pH 2.0) _x000B_Physical stability: Negligible volume variation due to changes in pH or ionic strength _x000B_Sanitization: Sanitize the packed column with 2% Hibitane/20% ethanol or with 70% ethanol



Relevant references

no information yet

Protein number

see ncbi


This product is intended FOR RESEARCH USE ONLY, and FOR TESTS IN VITRO, not for use in diagnostic or therapeutic procedures involving humans or animals. This datasheet is as accurate as reasonably achievable, but Nordic-MUbio accepts no liability for any inaccuracies or omissions in this information.


The purest agarose was used in the production of Protein A Agarose antibody Antibody Purification Reagent by nordc.If you buy Antibodies supplied by nordc they should be stored frozen at - 24°C for long term storage and for short term at + 5°C.




Antibodies are affinity purified with an antigen coated column or protein A or G agarose or beads. DNA is purified with endotoxin free silica columns or anion exchange resins. nordc supplies purification kits and ultra pure reagents.

French translation